Products

Email: [email protected]

2" api 7k cement hose

Cementing Hose 10000PSI - Cementing Hose 10000PSI

API Spec 7K--ISO 14693--ABS approval Recommended For: Used as a flexible connection between the cementing pump and maniford and cementing head for conveyance of cement slurries at high pressure. Tube: Modified Nitrile. 3/16” thick. Black. Specially designed for handling abrasion and corrosion. Reinforcement:

Cementing Hose 5000PSI - Cementing Hose 5000PSI

API Spec 7K--ISO 14693--ABS approval. Recommended For: Used as a flexible connection between the cementing pump and maniford and cementing head for conveyance of cement slurries at high pressure. Tube: Modified Nitrile. 3/16” thick. Black. Specially designed for handling abrasion and corrosion. Reinforcement:

API 7K——High Pressure Cementing Hose -Letone

API 7K——High Pressure Cementing Hose. Appliion: flexible connection in the cementing manifold for delivery water-based and oil-based cement slurries at high pressure. Tube: NR&SBRsythentic rubber/HNBR/UPE. Reinforcement: 4 or 6 layers of high tensile super flexible spiral steel wire orsteel cable. Cover: abrasion and weather

API 7K——High Pressure Cementing Hose-Letone

API 7K——High Pressure Cementing Hose . Appliion:flexible connection in the cementing manifold for delivery water-based and oil-based cement slurries at high pressure . Tube :NR&SBRsythentic rubber/HNBR/UPE

Mud Cement Hose Supplier

CEMENTING ROTARY HOSE W.P 10,000 psi. 10K Mud/Cementing Hose. 10,000 PSI W.P \ 15,000 PSI TEST\25,000 PSI BURST •Certifiion: API 7K ISO 14693-ABS APPROVAL. Construction: Material: Modified Nitrile Size: 2- 1/2 - 4 inch Imprint: Customized • Reinforcement: Multiple high strength steel cables

2" 10,000 psi hose | oilfield hose API 7k Certified| 10k hose

Rotary & Vibrator Hose Pressure Grade Chart Below. GRADE D Rotary Hose ; 5,000 PSI W.P 10,000 PSI TEST; GRADE E Rotary hose ; 7,500 PSI W.P 15,000 PSI TEST ; CEMENTING Rotary Hose ; 10,000 PSI W.P 15,000 PSI TEST; 2",2-1/2", 3",4" with up to 6" Flanges, Hammer union and threaded connections.

HIGH PRESSURE MUD AND CEMENT HOSES

22/3/2018· API-7K FSL2 API-7K FSL2 API-7K FSL0 Working pressure: 5000 psi Burst pressure: 12500 psi Temperature range: -20° C +100° C (-4° F +212° F) Flexible Specifiion Level: 2 Diameters: From 2” to 4” Note: Swaged hose assely with most common integral one piece Hammer Unions, flanges and male API terminations. Working pressure: 7500 psi

API 7k / Cement 10000 BGC 10000 V1.0 API 7K hose, FSL 0, Temp Range III Max Length Bend Radius Weight API 7k / Cement 10000 ID OD Max W.P. Burst Certifie …

Rotary Vibrator Hose / Mud Hose / Cementing Hose

This hose features high strength spiral steel wire reinforcement which provides a very flexible connection capable of withstanding high pumping pressures at API working pressures, also called mud hose, cement hose, kelly hose or shock-resistant hose. Size: 2", 2-1/2", 3", 3-1/2", 4", 5", 6" Rotary and Vibrator Hose, Grade A, Working Pressure 1500 Psi. Rotary and Vibrator Hose, …

Rotary Vibrator Hose 5000PSI Grade D (Kelly - Cement Hose

API Spec 7K--ISO 14693--ABS approval. Recommended For: Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Mainly producing Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose

ShanDong LongKou Special Rubber Hose CO.,LTD

9/7/2018· LongKou Special Rubber Hose. Main production:High-pressure Mud ,Cement Hoses,Flexible Choke and Kill Lines,BOP Control Hose. 01. Many varieties, wide materials and full specifiions. 02. Scientific certifiion, you are trustworthy. In 1999, the company passed the ISO9001 quality system certifiion, 2003 through the American Petroleum

Techfluid API 7K Mud & Cement Hose, API 17K Production

Previously branded Techflow Flexibles Ltd, Techfluid UK Ltd a leading manufacturer and supplier of flexible hose for the oil and gas industry. Techfluid UK Ltd products include API 7K HP Mud, Rotary and vibrator hoses, cement hoses and fire rated tensioner hoses

Black Eagle API 7K - FSL1 Mud & Cement · Hydrafit AS

22/4/2019· Awarded Contract for several length’s of Black Eagle API 7K - FSL1. **Mud & Cementing Equipment. **Parker Polyflex Black Eagle Hose Family. 2580N Series FSL-1 Hose is developed as a substitute to Chicksan Hardpipe. DNV GL – Type Approval complying with API Spec 7K, Drilling and Well Servicing Equipment FSL-0 and FSL-1 for DNVGL-OS-E101

TYPE APPROVAL CERTIFIE TAD00000CA

Working pressure rating of 5K is not intended for cement hoses in API 7K Table 10 Hose nominal sizes 1.25" and 1.5" are not specified in API 7K Table 10 Temperature ranges of the hoses do not correspond with temperature ranges specified in API 7K clause 9.7.3.1 The hoses do not meet the requirement of API 7K 9.7.10.2 for Deformation Test Under

High Pressure Flexible Lines for Drilling & Production

FSL levels for mud and cement hoses in API 7K FSL 0 - for cement hoses only To meet the FSL 0 requirements, a deformation test under pressure, an aient and low temperature bending test need to be performed, no pressure pulsation prototype test is required. FSL 1 - for rotary, vibrator, and jumper hoses in normal service conditions

Procedures for Inspection, Maintenance, Repair and - API

LIMITS, INSPECTION, CARE, AND USE OF CEMENT HOSE, DRILLING MUD VIBRATOR AND JUMPER HOSE, AND ROTARY HOSE This standard covers all types of hoses specified in clause 9.10 of API Spec 7K. The defini-tions of terms contained in clauses 3.0 and 9.10.1 of API Spec 7K shall apply. A.1 Hose length A.1.1 ROTARY HOSE LENGTH

1 2 x2b 300 psi series api 7k cement hose

1 2 x2b 300 psi series concrete vibrator hose. 1 1/2" api 7k rotary drilling hose - La Table des Géants API SPEC 7K drilling rubber hose MOQ: 5 Meters US $12.00-120.00 /51mm API 5000psi Rotary Drilling Rubber Hose US $2.65-2.65 /Meter 1 flexible api 7k rotary drilling hose Our company has won the honor of China 0 Hose Enterprises for six consecutive years.

Products certifiion | Dunlop Hiflex

2 Braided Compact Hydraulic Hose: Exceeds SAE J 517 - EN 857: DH SP33: 3 Braided Hydraulic Hose: Proprietary hose: ALFATECH 6000: Multispiral Isobaric Hydraulic Hose: SAE J 517: Lataa: API: 7K: Rotary Hose: Mud & Cement Hoses: API 7K: Lataa: BV: Rules for the Classifiion of Steel Ships and for the Classifiion of Offshore Units: 1SN , 2SN

Techfluid Tensioner Hose API 7K Mud & Cement Hose API 7K

High Pressure Mud Hose, Rotary Hose, Vibrator Hose (API-7K FSL 2) Tube: NBR Smooth Bore Reinforcement: High Strength Steel Cable Cover: Neoprene based rubber for anti-flaming, wear resistance, oil resistance, ozone & ageing resistance, UV resistance, designed for marine environment. Working temp: -25 to +100° C Length: Maximum length: 70m

Cement Hose - API7k & Diverse end Fittings - API 7K Approved

Reinforcement: multiple layers of high tensile spiral cables; Cover: synthetic rubber – oil, weather and abrasion resistant; Operating pressure: 10000psi and 15000psi; Operating temperature: -4°F to 250°F; Hose inside diameter: 2", 2.5", 3" and 4"; Safety factor: 2.25; Certifiion: API 7K. High Pressure Cement Hose.

API 7K FSL 0 & ISO 14693

API 7K, Temp range II, FSL 0 (ISO 14693) Type Approvals MSHA, API 7K FSL 0 Monogram Remarks Min. hose temperature resistance according to ISO 10619-2 method: Tube (internal mud): -46oC (-50oF) Cover (environment): -55 oC (-67oF) The hose structure is able to resist short term service in high temperatures up to 121 oC (250 F).

Oil and Gas Drilling Hose, Drilling Rotary Hose, Quick

BOP control line hose armor coat 3k Standards: API spec Q1-4358 / LR-2041381TA. Inquire Now. BOP Control Line hose armor coat 5k Standards: API spec Q1-4358 / LR-2041381TA. Inquire Now. Super high pressure Choke & kill line hose Standards: API spec 16C-0486 / Q1-4358. Inquire Now.

Drilling & Cementing Hoses | Specialist Hose Products

Available hose asselies include: Rotary Drilling Hoses to API 7K psi. Size: 2” to 4” with Working Pressure from 5,000 (Grade D) – 7,500 psi (Grade E). DNV & ABS Type Approval is available. Cementing Hoses are also available as 2” & 3" 10,000 psi. …

DRILLING HOSE SOLUTIONS - Active Service

Cement hose is a flexible connection between cementing pump and top drive for the delivery of high-pressure cement. Standard: API 7K / ISO 6807 API Monogram No.: 7K-0458 Approvals: API 7K / ABS / DNV GL Sizes: 2’’ to 6’’ Working temperature range: Class II, -25 to +100° C Flexibility specifiion level: FSL2 Maximum continuous length: 70m

API Spec 7K - Drilling and Well Servicing Equipment

2/2/2018· Question: Is a 5000 psi working pressure cement hose with an FSL 0 rating recognized by API? Yes. Hoses with a rated working pressure of lower than 10,000 psi can be labelled as rotary, mud or cement hoses. API Spec 7K - Drilling and Well Servicing Equipment; Last update: February 2, 2018 ; Author:

rotary drilling hoses & swivels - Marine hidraulik

Gates Black Gold® Cementing Hose (2”) 5k & 10k..419 Gates Black Gold® Cementing Hose (2 1/2”–4”) 5k & 10k .420 tested to API 7K standards and then shipped all in a matter of a few hours. and cementing head for conveyance of cement slurries at higt pressure. Temperature: -4°F to +212°F (-20°C to +100°C)